The importance of effective bulk storage practices and filtration
Fuel represents the largest operating expense on any mine site, so its correct storage and cleanliness needs to be carefully managed to ensure that it remains free of contaminants caused, typically, by dirt or water ingress. Dirty fuel, for example, causes accelerated wear and failure of fuel injectors, leading to unscheduled and costly downtime for their replacement. In contrast, injectors in engines using clean fuel typically last through the full engine life cycle to overhaul. Distilled fuel leaves the refinery very clean. However, fuel picks up contaminants during shipment and storage between the refinery and the time it is consumed. “Fuel quality can also be severely degraded after it is delivered to the user’s storage tank if there is evidence of poor tank design or maintenance practices,” explains Barloworld Equipment group product specialist, Reuben Phasha. (Barloworld Equipment is the Cat dealer for southern Africa.) Coalescers: an essential quality gatewayIn order to keep most of the contaminants out, fuel should be filtered as it goes into the storage tank. Coalescer filtration systems are the ideal solution, and have been the standard method to clean large volumes of fuel in the airline and petroleum industry for more than 40 years. Caterpillar offers a specially designed line of coalescers in four different capacities, namely 190, 379, 757 and 1135 litres per minute. Each unit is skid mounted, self-contained, and requires no electrical power.
They are designed to remove solid particles and water with single pass filtration, matching the flow requirements of the fuel delivery system.
Machine filtrationThe second line of defence is the machine’s onboard filtration system. The standard fuel filtration arrangement on machines is designed to act as a final cleaning step for moderately clean supply fuel of ISO 18/16/13 or cleaner, with water content of 0.05% (500 ppm) or less. The standard fuel filtration arrangement is not designed to clean very dirty or water-laden fuel. If diesel is to be cleaned by the machine fuel system (in the absence of a coalescer) additional filtration capacity must be added. This includes a water separator and additional filters. The amount of additional filtration required depends on the level of fuel contamination and the risk of filter plugging between scheduled service intervals. Standard filtration arrangements on machines vary. A typical standard arrangement on a Cat 3500 series diesel engine would contain the following:
- Two 10 micron absolute primary filters in parallel; and
- Two 4 micron absolute secondary filters in parallel